|
Technical Parameters:
Product Designations:
7336AC/DB
Structure:
NSK Bearings
Inside Diameter:
~~ mm
Outside Diameter:
~~ mm
Thickness:
~~ mm
Weight:
~~ KG
Brand:
NSK
Precision Rating:
P0 P1 P2 P3 P4 P5 P6
Bearing Material:
Bearing Steel (GCR15)
Seals Type:
OPEN
-
- Genuine 7340AC/DB NSK Bearing
- Compared with the DB Type, the distance between the effective load centers is small, so the capacity to sustain moments is inferior to the DB Type. Tandem. (DT). (Example). 7208 A DT. Radial loads and axial loads in one direction can be sustained. Since two bearings share the axial load, this arrangement is used when
-
- SGS 7338AC/DB NSK Bearing
- Highly precise angular contact thrust ball bearings for precision ball screws have been designed specifically for each application. Lineup includes both a highly
-
- SGS 7311AC/DB NSK Bearing
- Table 2:Types and Features of Matched Angular Contact Ball Bearings (DB) (Example) 7208 A DB. Radial loads and axial loads in both directions can be
-
- Genuine 7320AC/DB NSK Bearing
- Compared with the DB Type, the distance between the effective load centers is small, so the capacity to sustain moments is inferior to the DB Type. Tandem. (DT). (Example). 7208 A DT. Radial loads and axial loads in one direction can be sustained. Since two bearings share the axial load, this arrangement is used when
-
- SGS 7312AC/DB NSK Bearing
- Highly precise angular contact thrust ball bearings for precision ball screws have been designed specifically for each application. Lineup includes both a highly
-
- SGS 7202AC/DB NSK Bearing
- NSK offers a wide lineup of precision angular contact ball bearings where customers to choose the optimum specification of bearing according to the needs of
-
- SGS 7334AC/DT NSK Bearing
- The index for inch design tapered roller bearings is in Appendix 14 (Page C26). For metric-design medium-angle and steep-angle tapered roller bearings,.
-
- SGS 7300AC/DT NSK Bearing
- NSK Wheel Bearing - This bearing is equipped with an internal ABS sensor magnet.Care must betaken during installation to insure that the sensor magnet is
